Improve the profitability of your thermal break assembly process

And boost your Thermal Break Assembly

Thanks to 25 years of extensive experience, Aluro is able to offer a solution to significantly improve the PROFITABILITY of your production process.  This innovative machine allows you to knurl, pull in isolation strips and roll/crimp to assemble aluminium profiles for windows, doors, curtain walls, ...

  • Most advanced state-of-the-art technology

Aluro has used the most innovative technology to ensure that the profiles which you isolate and assemble with the Aluroller EVO, are of exceptional quality.

  • Unique rolling/crimping process

Each alu half-scale is supported over its entire length during the entire rolling/crimping process. The result is a straight profile without any distortions, starting with the very 1st profile. Moreover, there is no need for any backbending correction system. No bananas!

  • No more waste

The Aluroller EVO ensures that every assembled profile is straight, starting with the very 1st profile. The result is that your waste can be reduced to practically zero.

  • No more losses due to customer complaints

Every assembled profile will be 100% straight, even after cutting the profile. You will no longer have to deal with customer complaints due to profiles of poor quality, or have to take back and replace profiles.

  • Ready for tomorrow’s isolation techniques

The Aluroller EVO has been built with the input of established and new isolation providers. Traditional isolation strips as well as foam strips can easily be inserted in 1 single process. The end result meets the highest European quality standards. Your Aluroller EVO is ready for tomorrow’s isolation techniques, and will be operational for at least 15 years.

  • Fastest set-up times in the market

The user interface and machine set-up allow for extremely fast set-up times, improving flexibility, efficiency and profitability.

  • Limited floor space required

The 3-in-1 technology of the Aluroller EVO (knurling, strip pulling and rolling/crimping) allows you to save costs on floor space.

  • Less internal logistic handling

This 3-in-1 technology allows for less internal logistic handling. The internal flow of your production process is therefore optimized, and your costs as well as the risk for damage are reduced.

  • Extremely low tooling cost

We have built the Aluroller EVO in such a flexible way, that you will need less tooling and still be able to isolate and assemble a very wide range of profiles, using different isolation techniques.

  • Less dependency on personnel

Only 2 operators are needed to operate the Aluroller EVO. Moreover, only one experience operator is required for programming, so you will need less experienced personnel.

  • Lowest cost per meter

All of our efforts to build a flexible machine that need less set-up time, less operators, limited tooling have resulted in a qualitative machine that will run for at least 15 years.

  • Most profitable

In short, thanks to the unique rolling/crimping and assembly process, the Aluroller EVO ensures the highest profitability for the isolation and assembly of your aluminium profiles.


Need personal advice?


In Thermal Break Assembly

Increase your production output, while keeping costs low.  Minimize your waste and maximize your profitability.  With the Aluroller EVO.


With the Aluroller EVO

Thanks to our unique rolling/crimping process, every assembled profile will be straight.  No more bananas!